ICOM IC-706MKII-G

Нажми на картинку и ........!!!

Ультокомпактный HF/6 meter/2 meter/440MHz приемопередатчик (трансивер). Имеет встроенный DSP! Отличная оснастка для базовой или мобильной работы! IC-706MKIIG - это три в одном!.

SPECIFICATIONS

Ultra Small: 6.6 (W) x 2.3 (H) x 7.9 (D), 5.5 lb
Power output:
- HF + 6 Meter: 5-100 Watts (SSB/CW/FM/RTTY), 2-40 W (AM);
- 2 Meter: 2.5-50 Watts (SSB/CW/FM/RTTY), 2-20 W (AM);
- 440MHz - 2-20 Watts (SSB/CW/FM/RTTY), 2-8 W (AM)
All Mode, including RTTY and PSK31
0.03 - 200 MHz Broadband All Mode Receive
Detachable Control Panel/Display (optional equipment required for remote operation)
SSB/AM/CW Narrow Filter Options
2 Optional Crystal Filter Slots
AF-DSP
Tone Encode
Tone Squelch
Tone Scan
102 Alphanumeric Memories (99 regular, 2 scan edges, 1 call)
Access to RIT / Second VFO
Individual Band Change Key
Crossband Split
Large Built-In Speaker
Quiet Cooling Fan
Noise Blanker
IF Shift Interference Rejection
Preamp/Attenuator
CW Keyer
CW Pitch Control/Reverse
Full Break-in (QSK)
Speech Processor
VOX
SWR graphic sweep display (plot measurement)
The IC-706MKIIG can measure SWR in 2 ways: spot measurement or plot measurement
- Graph the measurement on the display in bandwidths of 10 kHz, 50 kHz, 100 kHz, or 500 kHz.
- Plot measurement usable on ANT 1, HF/6 meter bands only
Transmit Frequency Check
LCD Display with 1 Hz Readout
Easy-to-Use Scroll Menu System
2 Antenna Connectors (HF/VHF)
Durable, Continuous Duty Cycle Transmitter
One Button Duplex and Auto Repeater Functions
Backlit Keys for Better Nighttime Operation
Voice Synthesizer (optional)
Matching Antenna Tuner (optional)
0.5 ppm Stability with High Stability Crystal (optional)
9600/1200 baud Packet Ready (optional equipment required)
CT-17 level converter for PC programming (optional)
NEW! Optional RMK-706 remote mounting kit now available. Includes:
MB-62 mobile mounting bracket for the main unit
MB-63 mobile mounting bracket for the detached front panel
OPC-581 separation cable (11 ft)

Frequency Coverage:
- Receive:
- 0.030 - 199.999 MHz^*, 400 - 470 MHz^*
- Transmit:
- 1.8 - 1.999 MHz^*
  
  3.5 - 3.999 MHz^*
  
  7.0 - 7.300 MHz^*
  
  10.1 - 10.150 MHz
  
  14.0 - 14.350 MHz
  
  18.068 - 18.168 MHz
  
  21.0 - 21.450 MHz
  
  24.89 - 24.990 MHz
  
  28.0 - 29.700 MHz
  
  50.0 - 54.000 MHz^*
  
  144.0 - 148.000 MHz^*
  
  430.0 - 450.000 MHz^*
  
  * Varies according to version
Mode: USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
Number of memory channels. : 107 (99 regular, 6 scan edges, 2 call channels)
Antenna connector : SO-239x2 (for HF/50 MHz and 144/430 MHz)/50 ohms
Power supply requirement: 13.8 V ± 15% (negative ground)
Frequency stability: Less than ± 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than ± 1 ppm/hr. at +25 ^°C (+77^°F). Temperature fluctuations 0^°C to +50^°C (+32^°F to +122^°F) less than ±5 ppm.
Current drain: Transmit max. power 20 A; Receive standby 1.8 A, max. audio 2.0 A
Usable temperature range : -10^°C to 60^°C (14^°F to140^°F)
Dimensions (projections not included):
- 167(W) X 58(H) X 200(D) mm
- 6-9/16(W) X 2-9/32(H) X 7-7/8(D) in
Weight: 2.45 kg (5 lb 6 oz)
CI-V connector: 2 conductor, 3.5 (d) mm (1/8")
ACC connector: 13 pin

TRANSCEIVER

Output power:

	SSB/CW/RTTY/FM	AM
HF/50 MHz	5 - 100 W	2 - 40 W
144 MHz	2.5 - 50 W	2 - 20 W
440 MHz	2 - 20 W	2 - 8 W

Modulation system:

SSB	Balanced modulation
AM	Low level modulation
FM	Variable reactance modulation

Spurious emissions: Less than -60 dB (below 47.5 MHz: -50dB; 47.5 - 50 MHz: -50 to -60 dB; above 50 MHz: -60 dB)
Carrier suppression: More than 40 dB
Unwanted sideband: More than 50 dB
Microphone connector: 8 pin modular jack (600 ohm KEY connector: 3-conductor 6.35 (d) mm (1/4")
RTTY connector: 3-conductor 3.5 (d) mm (1/8")

RECEIVER

Receive system:
- SSB/CW/AM/WFM: Double superheterodyne
- FM : Triple superheterodyne

Intermediate frequencies

	1st	2nd	3rd
SSB/AM-N/FM	69.0115 MHz	9.0115 MHz	0.455 kHz (FM only)
CW	69.0106	9.0106	-
RTTY	69.0105 MHz	9.0105 MHz	-
AM/FM-N	69.0100 MHz	9.0100 MHz	0.455 kHz (FM only)
WFM	70.7000 MHz	10.7000 MHz	-

Receive sensitivity (preamp on, except 4- - 4.5 and 8 - 9 MHz)

	SSB/CW 10 dB S/N	AM 10 dB S/N	FM 12 dB SINAD	WFM 12 dB SINAD
0.5 - 1.8 MHz	-	13 µV	-	-
1.8 - 28 MHz	0.15 µV	2.0 µV	-	-
28 - 29.7 MHz	0.15 µV	2.0 µV	0.5 µV	-
50 MHz band	0.12 µV	1.0 µV	0.25 µV	-
76 - 108 MHz	-	-	-	10.0 µV
144/440 MHz band	0.11 µV	1.0 µV	0.18 µV	-

Squelch Sensitivity (threshold)

SSB Less than 5.6 µV

FM Less than 0.3 µV

Selectivity (normal setting)

SSB, CW, RTTY	More than 2.4 kHz/- 6 dB
	Less than 4.8 kHz/ -60 dB
AM/FM-N	More than 8.0 kHz/-6 dB
	Less than 30 kHz/-36 dB
FM	More than 12 kHz/-6 dB
	Less than 30 kHz/-60 dB

Spurious and image rejection ratio:
- SSB/CW/AM - More than 70 dB
Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
RIT variable range +/-9.99 kHz
PHONES connector: 3-conductor, 3.5 (d) mm (1/8")/8 ohms
EXT SP connector: 2-conductor, 3.5 (d) mm (1/8")/8 ohms

Вся установленная спецификация подвергается изменению без уведомления.

SUPPLIED ACCESSORIES

Hand microphone
DC power cable
Spare fuses
RTTY key plug
Electronic keyer plug
ACC cable

OPTIONS

IC-PW1 HF + 50 MHz 1 kW HF LINEAR AMPLIFIER
Covers all HF and 50 MHz bands, provides clean, stable 1 kW output. Automatic antenna tuner and compact detachable controller are standard. 2 exciter inputs are available. (An optional OPC-599 is required.)
AH-2b HF ANTENNA ELEMENT
For mobile operation with the AH-4. All bands between 7 - 54 MHz can be matched.
AH-4 HF+50 MHz AUTOMATIC ANTENNA TUNER
Covers 3.5 - 54 MHz with a 7 m (23 ft) or longer wire antenna.
AT-180 HF +50 MHz AUTOMATIC ANTENNA TUNER
Style and size are matched to the IC-706MKIIG.
PS-85 DC POWER SUPPLY
Output: 13.8 V DC (20 A max.).
MB-62 MOBILE MOUNTING BRACKET
For mounting the IC-706MKIIG main unit or the AT-180
MB-63 MOBILE MOUNTING BRACKET
For mounting the detached front panel.
MB-65 MOUNTING BASE
For mounting the detached front panel in a vehicle. The MB-63 is required.
MB-72 CARRYING HANDLE
Convenient for DX'peditions, operating in the field, etc.
OPC-581/OPC-587 SEPARATION CABLES
Provides separate operation. OPC-581: 3.5 m (11 ft); OPC-587: 5 m (16 ft)
SM-8 DESKTOP MICROPHONE
Equipped with 2 connection cables. (an optional OPC-599 is required.)
SM-20 DESKTOP MICROPHONE
High quality desktop microphone. (an optional OPC-599 is required.)
SP-7 EXTERNAL SPEAKER
Compact speaker for base station use.
SP-10 EXTERNAL SPEAKER
Heavy duty speaker for mobile use.
SP-12 EXTERNAL SPEAKER
Thin type speaker for mobile use.
UT-106: Provides AF DSP functions such as noise reduction and auto notch. Built in to some versions [like USA and Canada].
Filters:
- FL-100: 500 Hz/-6 dB (CW/RTTY nar.)
- FL-101: 250 Hz/-6 dB (CW nar.)
- FL-103: 2.8 kHz/-6 dB (SSB wide)
- FL-223: 1.9 kHz/-6 dB (SSB nar)
- FL-232: 350 Hz/-6 dB (RTTY/CW nar.)
CR-282 HIGH STABILITY CRYSTAL UNIT
CT-16 SATELLITE INTERFACE UNIT
CT-17 CI-V LEVEL CONVERTER
UT-102 VOICE SYNTHESIZER UNIT
OPC-599 MODULAR 8-PIN CABLE ADAPTER
OPC-598 ACC 13 PIN CABLE FOR AT-180
OPC-599 ACC 13 PIN CABLE ADAPTER
OPC-742 ACC 13 PIN CABLE